295050-0200 Diesel Fuel Injector for Toyota Hilux 1KD-FTV 2KD-FTV

$83.90

  • Part Number: 295050-0200
  • Cross Reference: 23670-30400 (2367030400)
  • Application: Toyota Hilux 1KD-FTV / 2KD-FTV
  • Type: Denso-System Common Rail Diesel Fuel Injector
✓ Free Worldwide ShippingTracking provided · Import duties and taxes not included
Compatibility Support

Ask for Compatibility

Not sure this part fits your engine or vehicle? Send us your OE number, VIN, engine model or old part photo before ordering.

  • OE number matching support
  • VIN / engine model verification
  • Old injector or pump photo accepted
  • Usually reply within 12 hours
Need help faster?

Send these details for a quicker fitment check.

OE NumberVIN / EnginePhotoQuantity
Why buy from Rayfuel?

100% tested before shipping
OE matching and warranty support
Worldwide delivery available

295050-0200 Denso diesel fuel injector for Toyota Hilux 1KD-FTV 2KD-FTV

The 295050-0200 Denso diesel fuel injector is supplied by Rayfuel as an aftermarket replacement for selected Toyota Hilux diesel applications using 1KD-FTV or 2KD-FTV engines. It cross-references Toyota OE number 23670-30400, which may also be written without punctuation as 2367030400. Rayfuel supplies this injector for part-number-matched diesel repair through our Denso common rail injector range.

295050-0200 Denso diesel fuel injector identification

  • Primary part number: 295050-0200
  • Toyota OE reference: 23670-30400
  • Alternative number format: 2367030400
  • Vehicle reference: Toyota Hilux
  • Engine reference: 1KD-FTV / 2KD-FTV
  • Product brand: Rayfuel

The references 23670-30400 and 2367030400 identify the same OE number written with and without hyphens. They should not be treated as two separate injector specifications. The Denso wording used in the SEO fields describes the common rail system and search reference; it does not claim that the supplied aftermarket replacement is a genuine Toyota or Denso boxed component. Use the stamped number and old injector photographs as the primary identification evidence.

Toyota Hilux application and fitment

This injector is listed for selected Toyota Hilux applications with 1KD-FTV and 2KD-FTV diesel engines. Toyota official Hilux documentation confirms that both engine families were used in the Hilux range. However, the engine name alone does not guarantee fitment because injector versions can differ according to production year, market, emissions specification, vehicle code and calibration requirement.

Before installation, compare the electrical connector, fuel inlet, body profile, nozzle end and all stamped markings with the injector removed from the vehicle. If the old injector carries a different number or a superseded reference, confirm the number relationship before ordering. Do not select the part only from a general Hilux, 1KD or 2KD description.

Common rail injector function

A common rail injector meters and delivers pressurized diesel fuel into the combustion chamber according to commands from the engine control system. Correct fuel quantity and timing support reliable starting, stable idle, balanced combustion and normal engine response. A worn, contaminated or electrically faulty injector can interfere with these functions, but the 295050-0200 Denso diesel fuel injector should be replaced only after appropriate diagnosis. Toyota’s official Hilux owner documentation provides a neutral vehicle reference for 1KD-FTV and 2KD-FTV models.

Common signs an injector may need checking

  • Hard starting or extended cranking
  • Rough idle or uneven cylinder operation
  • Reduced power under acceleration or load
  • Excessive exhaust smoke
  • Abnormal diesel combustion noise
  • Fuel leakage around the injector or sealing seat
  • Injector-related diagnostic trouble codes

These symptoms can also result from rail-pressure faults, fuel contamination, wiring problems, poor compression, air-intake restrictions or other engine conditions. Return-flow testing, electrical inspection, scan-tool data and professional bench testing may be required before an injector is condemned.

Installation and calibration

Have the injector installed by a qualified diesel technician. Keep all high-pressure connections clean, inspect the injector pipe and replace required sealing washers or related service parts. Follow the correct Toyota tightening sequence and service procedure for the exact engine. Some 1KD-FTV or 2KD-FTV configurations may require injector compensation or calibration data to be registered with compatible diagnostic equipment, while other versions may follow a different process. Confirm the applicable procedure instead of assuming coding is always required.

Before you order

Please confirm OE number, engine model or old part photos before ordering. Check 295050-0200 and 23670-30400 against the existing injector, then confirm the vehicle model, engine code, production year and market. For assistance, send clear photographs and vehicle details through the Rayfuel contact page.

The 295050-0200 Denso diesel fuel injector is intended for OE-number-matched aftermarket replacement in compatible Toyota Hilux applications. Final fitment depends on the exact vehicle specification and identification of the old injector.

Rayfuel supply and support

Rayfuel supplies diesel injection parts to repair shops, wholesalers and distributors worldwide. Support includes number comparison, photo-based fitment checks, quantity quotations, mixed-parts inquiries and secure export packaging. Contact us before shipment if you need several units or confirmation for a specific Toyota market.

Weight0.8 kg
Dimensions25 × 13 × 6 cm

Reviews

There are no reviews yet.

Be the first to review “295050-0200 Diesel Fuel Injector for Toyota Hilux 1KD-FTV 2KD-FTV”

Your email address will not be published. Required fields are marked *

Email WhatsApp