295050-0560 Diesel Fuel Injector for Mitsubishi Pajero 4M41

295050-0560 Denso diesel fuel injector for Mitsubishi Pajero 4M41

The 295050-0560 Denso diesel fuel injector is supplied by Rayfuel as an aftermarket replacement for selected Mitsubishi Pajero vehicles using the 4M41 diesel engine, including applications described for 2010 4WD models. It cross-references Mitsubishi number 1465A351 and is intended for part-number-matched fuel-system repair. Diesel workshops, parts wholesalers and vehicle repair specialists can find related products in our Denso common rail injector range.

295050-0560 Denso diesel fuel injector identification

• Primary part number: 295050-0560
• Cross-reference number: 1465A351
• Application: Selected Mitsubishi Pajero 4M41 diesel vehicles
• Vehicle description: Including selected 2010 4WD applications
• Product type: Common rail diesel fuel injector
• Product brand: Rayfuel

The 295050-0560 number identifies the injector family, while 1465A351 is an important Mitsubishi reference used by buyers when comparing replacement parts. The Denso wording in the SEO fields identifies the injection-system and part-number family. It does not claim that the supplied Rayfuel aftermarket replacement is a genuine Denso or Mitsubishi boxed component. The product photographs show the body profile, electrical connector, return connection and nozzle end for visual comparison.

Application and fitment

This injector is associated with selected Mitsubishi Pajero vehicles equipped with the 4M41 diesel engine. However, the same vehicle model and engine family may use different injector versions according to production date, market, emissions specification, ECU calibration and chassis configuration. A model name, engine code or registration year alone is therefore not enough to establish final compatibility.

Before ordering, compare 295050-0560 and 1465A351 with the number on the removed injector or a reliable parts record for the vehicle. Also check the VIN, exact production month, engine specification, electrical connector shape, mounting features and nozzle profile. If the old unit has another number, confirm an official supersession or replacement relationship before purchasing.

Injector function and performance

A common rail injector meters high-pressure diesel fuel and delivers it into the combustion chamber at controlled times and quantities. Correct operation supports reliable starting, stable idle, balanced combustion, normal exhaust behavior and consistent response under load. Internal wear, contamination, leakage or electrical faults can disturb injection, but the 295050-0560 Denso diesel fuel injector should only be replaced after suitable testing and diagnosis.

Common signs this injector may need checking

• Hard starting or extended cranking
• Rough idle or uneven cylinder contribution
• Reduced power during acceleration or under load
• Excessive black, white or gray exhaust smoke
• Abnormal diesel combustion noise
• Fuel leakage around the injector or sealing area
• Injector-related diagnostic trouble codes

These symptoms do not prove injector failure. Similar problems may be caused by low rail pressure, wiring faults, restricted fuel supply, poor compression, contaminated diesel or other engine conditions. Scan-tool checks, return-flow measurement, electrical inspection and professional bench testing may be required.

Installation and coding

Installation should be completed by a qualified diesel technician using clean working practices. Keep every high-pressure fuel connection protected from dirt, inspect the related pipework and replace required seals or service items. Follow the tightening sequence and torque values specified for the exact Mitsubishi engine. Some vehicle configurations may require injector compensation or calibration data to be registered with suitable diagnostic equipment, while others use a different procedure. Confirm the service information for the vehicle instead of assuming coding is always required.

Before you order

Please confirm OE number, engine model or old part photos before ordering. Verify 295050-0560 and 1465A351, then confirm the VIN, production date, 4M41 engine specification and market version. Mitsubishi Motors provides official model and product information through its global website, but final injector fitment should still be checked by exact part number. Send clear photographs through the Rayfuel contact page when you need compatibility support.

The 295050-0560 Denso diesel fuel injector is intended for OE-number-matched aftermarket replacement in compatible Mitsubishi Pajero 4M41 applications. Final suitability depends on the exact vehicle and old-part identification.

Rayfuel supply and support

Rayfuel supplies diesel injection parts to repair shops, wholesalers and distributors worldwide. Support includes part-number comparison, photo-based fitment checks, quantity quotations, mixed-parts inquiries and secure export packaging. Contact us before shipment when you need several injectors or confirmation for a specific Mitsubishi application.