
0928400692 Fuel Metering Valve for CHRYSLER Voyager 2.8 CRD / DODGE NITRO 2.8 CRD / JEEP LIBERTY 2.8 CRD
$28.00
- OE / Part Number: 0928400692
- Product Type: Fuel Metering Valve
- Application: Selected CHRYSLER Voyager 2.8 CRD / DODGE NITRO 2.8 CRD / JEEP LIBERTY 2.8 CRD
- Condition: New aftermarket replacement
- Quantity: 1 valve
- Brand: Rayfuel
Please confirm the complete OE number and old-part shape before ordering.
Ask for Compatibility
Not sure this part fits your engine or vehicle? Send us your OE number, VIN, engine model or old part photo before ordering.
- OE number matching support
- VIN / engine model verification
- Old injector or pump photo accepted
- Usually reply within 12 hours
Send these details for a quicker fitment check.
100% tested before shipping
OE matching and warranty support
Worldwide delivery available
0928400692 fuel metering valve for CHRYSLER Voyager 2.8 CRD / DODGE NITRO 2.8 CRD / JEEP LIBERTY 2.8 CRD
The 0928400692 fuel metering valve is supplied under the Rayfuel product brand as an aftermarket replacement for selected CHRYSLER Voyager 2.8 CRD / DODGE NITRO 2.8 CRD / JEEP LIBERTY 2.8 CRD. This listing was prepared from the complete OE reference and the application information supplied in the product catalog. It is intended for diesel repair shops, fuel-system specialists, distributors and vehicle or equipment owners who have verified the number on the removed valve.
Rayfuel is the product brand for this page. Vehicle, engine and fuel-system names identify application references only. The item is not presented as a genuine boxed component from any vehicle or fuel-system manufacturer. Browse related parts in our diesel fuel metering valve range.
Product Identification
- OE / part number: 0928400692
- Product type: Fuel Metering Valve
- Application: Selected CHRYSLER Voyager 2.8 CRD / DODGE NITRO 2.8 CRD / JEEP LIBERTY 2.8 CRD
- Quantity: 1 valve
- Product brand: Rayfuel
- Condition: New aftermarket replacement
Use the complete number 0928400692 as the primary purchasing reference. Numbers written with different spacing or punctuation can describe the same reference, while two valves with a similar body or connector may have different internal flow or pressure-control characteristics. Appearance alone is not sufficient for fitment confirmation.
Application and Fitment Checks
This valve is listed for selected CHRYSLER Voyager 2.8 CRD / DODGE NITRO 2.8 CRD / JEEP LIBERTY 2.8 CRD. Exact compatibility may still depend on the fuel-pump number, engine code, production date, power rating, emissions specification and regional configuration. Compare the OE number from the original part and, where available, confirm the pump or vehicle record before purchase.
Also compare the electrical connector, mounting flange or thread, sealing position, valve length and tip profile shown in the product image. If the old number cannot be read clearly, send photos of the complete component and its installation position for a manual comparison.
What This Valve Does
A diesel fuel control valve helps the fuel system regulate inlet quantity, pressure or pump delivery according to the design of the application. Stable valve operation supports reliable starting, controlled fuel pressure, smooth idle and consistent response under load. Final system performance also depends on clean fuel, unrestricted supply, correct sensor signals, sound wiring and the condition of the pump and injectors.
Common Symptoms Requiring Diagnosis
- Hard starting or extended cranking
- Unstable idle, hesitation or stalling
- Low, high or fluctuating fuel-pressure readings
- Reduced power under acceleration or load
- Fuel-pressure control or actuator fault codes
- Intermittent limp mode
These symptoms do not prove valve failure. Restricted filters, air in the supply line, contaminated fuel, wiring faults, pressure-sensor errors, injector leakage and internal pump wear can produce similar complaints. Test the fuel system and confirm the cause before replacement.
Installation Notes
Installation should be completed by a qualified diesel technician using clean working practices. Keep fuel connections capped until assembly, prevent debris from entering the pump, renew the specified seal and follow the correct tightening procedure. Do not force the valve into position. After installation, prime the system and check pressure behavior and leakage according to the service procedure for the application.
Before You Order
Please confirm OE number, pump number, application or old-part photos before ordering. Verify 0928400692 and the complete component shape. For help with number and photo comparison, use the Rayfuel contact page.
The 0928400692 fuel metering valve should be selected by the full OE reference and verified application data, not only by vehicle name or visual similarity.




Reviews
There are no reviews yet.