095000-5663 Diesel Fuel Injector for Toyota Hiace 2KD-FTV

095000-5663 Denso diesel fuel injector for Toyota Hiace

The 095000-5663 Denso diesel fuel injector is supplied by Rayfuel as a new aftermarket replacement for selected Toyota Hiace and Toyota Hilux vehicles equipped with the 2KD-FTV 2.5L D-4D diesel engine. It is intended for repair shops, diesel specialists, distributors and vehicle owners replacing an injector identified by the corresponding numbers. Browse related products in our Denso common rail injector range.

This product is supplied under the Rayfuel aftermarket brand for use with a Denso common-rail injection system. It is not represented as a genuine Toyota or genuine Denso component. Compatibility must be established using the number on the original injector, Toyota OE number, engine model and vehicle details.

Product identification

• Primary part number: 095000-5663
• Toyota OE reference: 23670-30050
• Product type: Common rail diesel fuel injector
• Injection system: Denso system
• Engine application: Toyota 2KD-FTV 2.5L D-4D diesel
• Vehicle applications: Selected Toyota Hiace and Toyota Hilux models
• Product brand: Rayfuel

095000-5663 is the primary injector identification used for this listing, while 23670-30050 is the corresponding Toyota OE reference shown on the supplied product. Numbers written without punctuation, such as 0950005663 and 2367030050, are formatting variations rather than separate parts. The Denso wording identifies the injection-system family and does not claim genuine Denso manufacture.

Application and fitment

The injector is associated with selected Toyota Hiace and Hilux applications using the 2KD-FTV 2.5L common-rail diesel engine. Fitment may vary according to production date, destination market, emissions specification, ECU calibration and previous service replacements. Two vehicles with the same model name or engine family can therefore use different injector versions.

Before ordering, compare the complete number on the removed injector with 095000-5663 and check for Toyota reference 23670-30050. Also compare the electrical connector, fuel connection, hold-down area and injector body. A vehicle model or engine code by itself is not sufficient for final fitment.

Injector function and performance

A common-rail injector meters and atomizes high-pressure diesel fuel in response to commands from the engine control system. Correct injection quantity and spray formation support stable starting, balanced combustion, normal fuel consumption and controlled exhaust emissions. Injector operation also depends on rail pressure, clean fuel, electrical control, cylinder compression and the condition of the wider fuel system.

Common signs this injector may need replacing

• Hard starting or extended cranking
• Uneven idle or engine vibration
• Reduced power under acceleration
• Increased black, white or gray exhaust smoke
• Diesel knock or abnormal combustion noise
• Excessive injector return flow
• Injector-related diagnostic trouble codes

These symptoms do not by themselves confirm injector failure. A qualified technician should test injector correction values, return flow, rail pressure, wiring and engine mechanical condition before replacement.

Installation and coding

Installation should be completed by a qualified diesel technician using clean tools and appropriate procedures. Inspect or replace the required seals and washers, clean the injector seat and tighten connections to the vehicle manufacturer’s specification. Depending on the vehicle control system and injector configuration, calibration or compensation-code entry may be required after installation. Confirm the applicable workshop procedure rather than assuming coding is always necessary.

Before you order

Please confirm OE number, engine model or old part photos before ordering. Verify 095000-5663 and 23670-30050, then check the VIN, production date and exact 2KD-FTV specification. General common-rail system information is available from Denso Aftermarket. Send clear photographs through the Rayfuel contact page when you need compatibility support.

The 095000-5663 Denso diesel fuel injector is intended for OE-number-matched aftermarket replacement in compatible Toyota Hiace and Hilux 2KD-FTV applications. Final suitability depends on exact old-part identification.

Rayfuel supply and support

Rayfuel supplies diesel injection components to repair workshops, wholesalers and distributors worldwide. Support includes part-number comparison, photo-based fitment checks, quantity quotations, mixed-parts inquiries and secure export packaging. Contact us before shipment when you need several injectors or confirmation for a specific Toyota application.