095000-7490 Diesel Fuel Injector for Mitsubishi L200 Triton 4D56

095000-7490 Denso diesel fuel injector for Mitsubishi L200 Triton

The 095000-7490 Denso diesel fuel injector is supplied by Rayfuel as a new aftermarket replacement for selected Mitsubishi L200 and Triton vehicles using the 2.5L 4D56 DI-D diesel engine. It cross-references Mitsubishi number 1465A297 and is intended for part-number-matched fuel-system repair. Diesel workshops, parts wholesalers and vehicle repair specialists can browse related products in our Denso common rail injector range.

This product is supplied under the Rayfuel aftermarket brand for use with a Denso common-rail injection system. It is not represented as a genuine Mitsubishi or genuine Denso boxed component. Compatibility must be established using the number on the removed injector, the Mitsubishi OE reference, engine code and vehicle information.

Product identification

• Primary part number: 095000-7490
• Mitsubishi OE reference: 1465A297
• Product type: Common rail diesel fuel injector
• Injection system: Denso system
• Engine application: Mitsubishi 4D56 2.5L DI-D diesel
• Vehicle applications: Selected Mitsubishi L200 and Triton models
• Product brand: Rayfuel

The number 095000-7490 identifies the injector family used in this listing, while 1465A297 is an important Mitsubishi OE reference. The formatting variation 0950007490 refers to the same part-number format. Related references such as 1465A257 and later 095000-956 series numbers can appear in catalog supersession data, but buyers should not assume interchangeability without VIN or old-part verification.

095000-7490 Denso diesel fuel injector application and fitment

This injector is associated with selected Mitsubishi L200 and Triton 2.5L applications using the common-rail 4D56 engine. Mitsubishi uses the Triton name in some markets and the L200 name in others. Fitment can vary according to production date, destination market, engine output, emissions specification, ECU calibration and previous part supersessions. A model name, engine displacement or registration year alone is not sufficient for final confirmation.

Before ordering, compare 095000-7490 and 1465A297 with the complete number on the removed injector or a reliable VIN-based parts record. Also compare the electrical connector, high-pressure connection, return port, hold-down profile, body length and nozzle end. If the removed part shows another number, confirm a documented replacement relationship before purchasing.

Injector function and performance

A common-rail injector meters high-pressure diesel fuel and delivers it into the combustion chamber at controlled times and quantities. Correct operation supports reliable starting, stable idle, balanced combustion, appropriate exhaust behavior and consistent response under load. Injector performance also depends on clean fuel, correct rail pressure, sound wiring, adequate cylinder compression and the condition of the wider fuel system.

Common signs this injector may need replacing

• Hard starting or extended cranking
• Rough idle or uneven cylinder contribution
• Reduced power during acceleration
• Increased black, white or gray exhaust smoke
• Abnormal diesel combustion noise
• Excessive injector return flow
• Injector-related diagnostic trouble codes

These symptoms do not prove injector failure. Similar problems may be caused by low rail pressure, wiring faults, restricted fuel supply, poor compression, contaminated diesel or other engine conditions. Scan-tool checks, return-flow measurement, electrical inspection and professional testing may be required.

Installation and coding

Installation should be completed by a qualified diesel technician using clean working practices. Protect every high-pressure connection from contamination, inspect associated pipework and replace required seals or service items. Follow the tightening procedure specified for the exact Mitsubishi engine. Compatible 4D56 applications may require injector compensation data to be programmed with suitable diagnostic equipment. Confirm the workshop procedure for the exact vehicle before starting the engine.

Before you order

Please confirm OE number, engine model or old part photos before ordering. Verify 095000-7490 and 1465A297, then check the VIN, production date and exact 4D56 specification. Mitsubishi confirms that Triton is sold as L200 in some markets on its official website, but final injector fitment must still be confirmed by number. Send photographs through the Rayfuel contact page when you need support.

The 095000-7490 Denso diesel fuel injector is intended for OE-number-matched aftermarket replacement in compatible Mitsubishi L200 and Triton 4D56 applications. Final suitability depends on exact vehicle and old-part identification.

Rayfuel supply and support

Rayfuel supplies diesel injection components to repair workshops, wholesalers and distributors worldwide. Support includes part-number comparison, photo-based fitment checks, quantity quotations, mixed-parts inquiries and secure export packaging. Contact us before shipment when you require several injectors or confirmation for a specific Mitsubishi application.