095000-7761 Diesel Fuel Injector for Toyota Hilux 2KD-FTV

095000-7761 Denso diesel fuel injector for Toyota Hilux

The 095000-7761 Denso diesel fuel injector is supplied by Rayfuel as a new aftermarket replacement for selected Toyota Hilux vehicles using the 2KD-FTV 2.5L D-4D diesel engine. It cross-references Toyota number 23670-30300 and is intended for part-number-matched fuel-system repair. Diesel workshops, parts wholesalers and vehicle repair specialists can browse related products in our Denso common rail injector range.

This product is supplied under the Rayfuel aftermarket brand for use with a Denso common-rail injection system. It is not represented as a genuine Toyota or genuine Denso boxed component. Compatibility must be established using the number on the removed injector, the Toyota OE reference, engine code and vehicle information.

Product identification

• Primary part number: 095000-7761
• Toyota OE reference: 23670-30300
• Product type: Common rail diesel fuel injector
• Injection system: Denso system
• Engine application: Toyota 2KD-FTV 2.5L D-4D diesel
• Vehicle application: Selected Toyota Hilux models
• Product brand: Rayfuel

The number 095000-7761 identifies the injector family used in this listing, while 23670-30300 is an important Toyota OE reference. Numbers without punctuation, including 0950007761 and 2367030300, are formatting variations rather than different parts. Other nearby 095000-776 series numbers may represent related calibrations, so the full stamped number must be compared before ordering.

095000-7761 Denso diesel fuel injector application and fitment

This injector is associated with selected Toyota Hilux applications using the 2KD-FTV 2.5L common-rail diesel engine. Catalog information also associates the part-number family with certain Toyota Hiace applications, but fitment can vary according to production date, destination market, emissions specification, ECU calibration and previous part supersessions. Vehicle model, engine displacement or registration year alone is not sufficient for final confirmation.

Before ordering, compare 095000-7761 and 23670-30300 with the complete number on the old injector or a reliable VIN-based parts record. Also compare the electrical connector, high-pressure connection, hold-down profile, body length and nozzle end. If the removed part shows another number, confirm a documented replacement relationship before purchase.

Injector function and performance

A common-rail injector meters high-pressure diesel fuel and delivers it into the combustion chamber at controlled times and quantities. Correct operation supports reliable starting, stable idle, balanced combustion, appropriate exhaust behavior and consistent response under load. Injector performance also depends on clean fuel, correct rail pressure, sound wiring, adequate compression and the condition of the wider fuel system.

Common signs this injector may need replacing

• Hard starting or extended cranking
• Rough idle or uneven cylinder contribution
• Reduced power during acceleration
• Increased black, white or gray exhaust smoke
• Abnormal diesel combustion noise
• Excessive injector return flow
• Injector-related diagnostic trouble codes

These symptoms do not prove injector failure. Similar problems may be caused by low rail pressure, wiring faults, restricted fuel supply, poor compression, contaminated diesel or other engine conditions. Scan-tool checks, return-flow measurement, electrical inspection and professional testing may be required.

Installation and coding

Installation should be completed by a qualified diesel technician using clean working practices. Protect every high-pressure connection from contamination, inspect associated pipework and replace required seals or service items. Follow the tightening procedure specified for the exact Toyota engine. Some configurations may require injector compensation or calibration data to be registered with suitable diagnostic equipment, while others use a different process. Confirm the applicable workshop procedure rather than assuming coding is always required.

Before you order

Please confirm OE number, engine model or old part photos before ordering. Verify 095000-7761 and 23670-30300, then check the VIN, production date and exact 2KD-FTV specification. Toyota confirms the 2KD-FTV as a 2.5L diesel engine in its official engine information, but final injector fitment must still be confirmed by number. Send clear photographs through the Rayfuel contact page when you need support.

The 095000-7761 Denso diesel fuel injector is intended for OE-number-matched aftermarket replacement in compatible Toyota Hilux 2KD-FTV applications. Final suitability depends on exact vehicle and old-part identification.

Rayfuel supply and support

Rayfuel supplies diesel injection components to repair workshops, wholesalers and distributors worldwide. Support includes part-number comparison, photo-based fitment checks, quantity quotations, mixed-parts inquiries and secure export packaging. Contact us before shipment when you require several injectors or confirmation for a specific Toyota application.