295050-0760 Diesel Fuel Injector for Hino N04C Euro 4 Dutro 300 Series

295050-0760 Denso diesel fuel injector for Hino N04C Euro 4

The 295050-0760 Denso diesel fuel injector is supplied by Rayfuel as an aftermarket replacement for selected Hino light-duty truck applications using the N04C Euro 4 diesel engine. It cross-references Hino OE number 23670-E0380 and is commonly associated with the Hino Dutro and Hino 300 Series. Rayfuel supplies this injector to diesel repair workshops, parts wholesalers and distributors through our Denso common rail injector range.

295050-0760 Denso diesel fuel injector identification

• Primary part number: 295050-0760
• Hino OE reference: 23670-E0380
• Vehicle reference: Hino Dutro / Hino 300 Series
• Engine reference: N04C Euro 4
• Product type: Common rail diesel fuel injector
• Product brand: Rayfuel

Compare both 295050-0760 and 23670-E0380 with the markings on the injector removed from the engine. The Denso wording used in the SEO fields identifies the injection-system search reference and does not claim that the supplied aftermarket unit is a genuine Denso or Hino boxed product. The photos show the replacement injector, connector, body shape and identification area so buyers can perform an initial visual comparison before ordering.

Hino N04C application and fitment

This injector is listed for selected Hino N04C Euro 4 applications, including Dutro and 300 Series light-duty trucks. Hino official vehicle information confirms that the 300 Series and Dutro ranges use variants of the N04C engine. However, an N04C engine-family match alone is not enough to guarantee injector compatibility. Production year, vehicle market, emissions configuration, engine suffix and calibration specification can affect the injector version.

Check the complete stamped number, electrical connector, fuel inlet, body arrangement and nozzle end against the old injector. If the old unit shows a superseded or different reference, confirm the relationship before installation. Do not select the part only from the truck model name or a general N04C description.

Common rail injector function

A common rail injector controls the amount and timing of pressurized diesel fuel entering the combustion chamber. Correct operation supports normal starting, balanced combustion, stable idle and controlled engine response. A worn, contaminated or electrically faulty injector may disturb these functions, but the 295050-0760 Denso diesel fuel injector should only be replaced after suitable diagnosis. For an official vehicle reference showing the Hino 300 Series with an N04C engine, see Hino Motors vehicle information.

Common signs an injector may need checking

• Hard starting or extended cranking time
• Rough idle or uneven cylinder contribution
• Reduced power during acceleration or under load
• Excessive exhaust smoke
• Abnormal diesel combustion noise
• Fuel leakage around the injector or sealing area
• Injector-related diagnostic trouble codes

These symptoms do not prove injector failure. Similar problems can result from low rail pressure, wiring faults, fuel contamination, compression loss, air-intake restrictions or other engine conditions. Return-flow testing, electrical checks, scan-tool data and professional injector bench testing may be required before replacement.

Installation and calibration

Installation should be performed by a qualified diesel technician. Keep all high-pressure fuel-system connections clean, inspect the injector pipe and replace required seals or washers. Follow the correct Hino service procedure and tightening information for the exact N04C application. Some vehicle configurations may require injector compensation or calibration information to be registered with compatible diagnostic equipment, while others may use a different process. Confirm the correct procedure instead of assuming coding is always required.

Before you order

Please confirm OE number, engine model or old part photos before ordering. Verify 295050-0760 and 23670-E0380 directly against the existing injector, and confirm the truck model, N04C engine version, production year and market. If you need assistance, send clear photographs and vehicle details through the Rayfuel contact page.

The 295050-0760 Denso diesel fuel injector is intended for OE-number-matched aftermarket replacement in compatible Hino N04C Euro 4 applications. Final fitment depends on exact vehicle and old-part identification.

Rayfuel supply and support

Rayfuel supplies diesel injection parts to repair shops, wholesalers and distributors worldwide. Support includes part-number comparison, photo-based fitment checks, quantity quotations, mixed-parts inquiries and secure export packaging. Contact us before shipment if you need several injectors or confirmation for a particular Hino market specification.